Scania P320 EKOCEL
Цена на приложение

24
























1 / 24
Принтирай
INFO
Продуктова група
Шаси кабини
Марка /Модел
Scania P320 EKOCEL
Година на регистрация
2017
Отчитане на брояча
173 686 kм
Местоположение на машината
Bielany Wrocławskie
Страна
Полша
ID на Mascus
AC67F51A
ХАРАКТЕРИСТИКИ
Конфигурация на водещия мост
6x2
Производствен номер
YS2P6X20005488860
Регистрационен номер
WGM29930
Емисионен клас
Евро 6
Двигател
235 кв (320 кс)
Водоизместимост на двигателя
9 291 cm3
Предаване
Automatic
Друга информация
VEHICLE/EQUIPMENT DESCRIPTION AND TECHNICAL CONDITION:
SCANIA P320 6×2 – EKOCEL MEDIUM XLS refuse collection truck
Moderate mileage.
Electronic body control.
Three-axle chassis.
Approximate start time.
Estimated service cost is approximately 40,000-50,000 PLN.
VEACOM VERIFICATION STANDARD:
Equipment verified according to the VEACOM CZ standard.
The offered equipment comes exclusively from trusted sources – directly from end users. Before being listed for auction, it was verified on-site by a VEACOM technician who physically inspected its technical and visual condition, documentation, VIN/serial number, and visible defects.
The description and photographic documentation fully reflect the actual condition of the offered equipment. A transparent verification process increases buyer safety, reduces the risk of discrepancies with the description, and allows for informed purchasing decisions.
GENERAL CONDITION: The description is general and does not constitute a guarantee of the full technical functionality of individual components. The Buyer should take into account the described condition of the Vehicle and the possibility of additional signs of wear resulting from previous use. KNOWN DEFECTS AND FAULTS: Dead battery. Poor body speed - slow operation. Signs of corrosion. Errors on the screen. Damaged steering knuckles on axle 1 and axle 3. Oil leaks on the gearbox. Bushings need to be replaced - all on the front axle springs and hangers. Damaged fuel tank. Longitudinal and transverse link ends need to be replaced. Shock absorbers on axle 3 need to be replaced. All bushings on the half-springs need to be replaced. DPF needs to be burned out., Frame corrosion, Due to long-term shutdown, service is required before putting into operation, Reduced engine power, Increased oil consumption, Poor engine starts
Veacom s.r.o.
Strakonická 3367 150 00 Praha Praha Чехия
11
Вижте информацията за търгаПолучаване на известие по имейл