RB iconIP iconMPE iconRBAS iconRouse icon
Mascus LogoВсички категории
Поставете Машина/Камион

Teknamotor Skorpion 250R/90

Цена без ДДС

Цена на приложение

Compnay LOGO
Images5
Teknamotor Skorpion 250R/90 Машини за цепене и рязане на дърва
Teknamotor Skorpion 250R/90 Машини за цепене и рязане на дърва
Teknamotor Skorpion 250R/90 Машини за цепене и рязане на дърва
FavoriteЛюбим
shareСподелете
Save searchЗапазване на търсенето
Принтирай

INFO

Продуктова група
Машини за цепене и рязане на дърва
Марка /Модел
Teknamotor Skorpion 250R/90
Година на регистрация
2025
Допълнителни опции
Неупотребявани
Местоположение на машината
Ostrowiec Świętokrzyski, świętokrzyskie
Страна
Полша
Обща оценка
1
2
3
4
5
ID на Mascus
7CDA1EFC

ХАРАКТЕРИСТИКИ

Пълна история на поправките
Да
Тегло за транспортиране
1 150 кг
Страна на производство
Полша
Приложения
Skorpion 250 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 250 mm. Overall dimensions (LxWxH) 2830 x 2400 x 2680 [A] / 1800 x 2100 x 2600 [B] [mm] Weight 1450 [A] / 1150 [B] [kg] Branch diameter 250 [mm] No of knives 2 or 3 cutting + 2 counter-knife Feeding speed up to 42 [running meters/min] Chipping capacity up to 18 [stère meters/h] Chip width from 9 to 14 [mm] Feeding unit hydraulic feeder Disk diameter 800 [mm] Hopper dimensions (WxH) 420x255 [mm] Min. power of tractor 80 [hp] ()* - dimension after the pipe is raised, during operation Equipment included: - Swivelled by360° ejection tube with deflector. - PTO shaft. - Own hydraulic system. - Electronic system of work control with hour meter. - Feeding table with a chain feeder. Additional accessories on request: - Extension of the ejection tube.
Друга информация
Skorpion 250 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 250 mm. Skorpion 250R/90 is a disc model with a pneumatic blow-out system on the disc. Chips are ejected through the rotating chimney which can turn by 360 degrees in relation to the chassis. The cutting system consists of a disc with cutting knives sharpened on either side. This chipper is mounted on a single-axial chassis, adapted to tow it in the forest and field roads. There is also a version with a three-point system of linkage to the tractor (without single-axial chassis). The chipper is designed to work with an over 80 hp farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 or 1000 revolutions per minute. The essential equipment of the chipper includes a hydraulic propulsion system that drives the feeding rollers and is driven by its own hydraulic pump. Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position. Skorpion 250 R/90 is equipped with one of the most modern electronic No-stress systems available on the European market; the system automatically prevents overloading of the drive system by temporarily stopping the feeding. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter. The chipper is also additionally equipped with an electronic system of work control, protecting the machine against excessive duty through temporary stopping the feeding. Overall dimensions (LxWxH) 2830x2400x2680 [A] // 1800x2100x2600 [B] [mm] Weight 1450[A] / 1150[B] [kg] Branch diameter 250 [mm] No of knives 2 or 3 cutting + 2 counter-knife Feeding speed up to 42 [running meters/min] Chipping capacity up to 18 [stère meters/h] Chip width from 9 to 14 [mm] Feeding unit hydraulic feeder Disk diameter 800 [mm] Hopper dimensions (WxH) 420x255 [mm] Min. power of tractor 80 [hp] Equipment included: -PTO shaft -Independent hydraulic system -Adjustment of height of ejecting the chips -Rotary chimney 360° -No-stress system Additional accessories on request: -Extension of the ejection tubeПокажете повече

Teknamotor Sp. z o.o.

ul. Swietokrzyska 2a 27-400 Ostrowiec Świętokrzyski Świętokrzyskie Полша
15
Вижте информацията за търга
Получаване на известие по имейл
Покажи всички обяви на Teknamotor Sp. z o.o.
report adДокладвайте за подозрителна реклама